325/35R19 Tire Size Calculator
Complete specifications and dimensions for 325/35R19 tire size
325/35R19 Quick Specifications
How to Read 325/35R19 Tire Size? What Does 325/35R19 Mean?
Let's break down the tire size 325/35R19 to understand what each number and letter means:
325 (Section Width)
The first number "325" represents the tire's width in millimeters, measured from sidewall to sidewall. In this case, the tire is 325 millimeters wide (approximately 12.80 inches).
35 (Aspect Ratio)
The number "35" after the forward slash is the aspect ratio or profile. This means the tire's sidewall height is 35% of its width. For a 325mm wide tire, the sidewall height would be113.75mm (approximately 4.48 inches).
R (Construction)
The letter "R" indicates this is a Radial tire, which is the most common type of tire construction today. Radial tires have layers of cord that run radially (at 90 degrees) from the center of the tire.
19 (Wheel Diameter)
The last number "19" specifies the wheel diameter in inches. This means the tire is designed to fit a 19-inch wheel. The total diameter of the tire would be the wheel size plus twice the sidewall height.
Detailed Measurements for 325/35R19
Based on the 325/35R19 tire size, here are the calculated measurements:
- Total Tire Diameter: 19 inches (wheel) + 2 × 4.48 inches (sidewall height) = 27.96 inches
- Sidewall Height: 113.75mm or 4.48 inches (on each side)
- Circumference: Approximately 87.83 inches (based on π × total diameter)
- Revolutions per Mile: About 721 (varies slightly based on load and air pressure)
Key Tire Measurements Explained
Section Width
The width of the tire from sidewall to sidewall, measured in millimeters. For 325/35R19, this is 325mm or approximately 12.80 inches.
Aspect Ratio
The height of the tire's sidewall as a percentage of the width. A 35 aspect ratio means the sidewall height is 35% of the tire's width.
Overall Diameter
The total height of the 325/35R19 tire when mounted on the wheel is 27.96 inches. This includes both the wheel diameter and the tire's sidewall height on both sides.
Sidewall Height
For 325/35R19, the sidewall height is 113.75mm (4.48 inches). This is the distance from the wheel rim to the outer edge of the tire.
Why Accurate Tire Measurements Matter
- Vehicle Performance: Tire size affects your vehicle's acceleration, braking, and handling characteristics.
- Speedometer Accuracy: Changes in tire diameter can affect your speedometer and odometer readings.
- Clearance Issues: Incorrect tire sizes may cause rubbing against your vehicle's fenders or suspension components.
- Fuel Economy: Larger or heavier tires can impact your vehicle's fuel efficiency.
Pro Tips for 325/35R19 Tires
✓ Check Your Vehicle's Manual: Always consult your vehicle's manual to confirm 325/35R19 is the correct size for your vehicle.
✓ Consider Your Usage: The 325/35R19 size may be better suited for specific uses (highway driving, off-road, performance, etc.).
✓ Maintain Proper Sizing: Keep front and rear tire sizes consistent unless specifically recommended otherwise by your vehicle manufacturer.
✓ Watch for Clearance: When using 325/35R19 tires, ensure adequate clearance for steering, suspension, and body components.
Related Tire Sizes
Explore similar tire sizes that might fit your vehicle:
Tire Size Resources
Interactive Calculator
Use our full-featured tire calculator to compare different sizes and see detailed comparisons.
Open Calculator →Tire Size Guide
Learn how to read tire sizes and understand what each number means for your vehicle.
Read Guide →Vehicle Tire Sizes
Find factory-recommended tire sizes for your specific vehicle make and model.
Browse Vehicles →